About Us Contact Us Shipping Easy Returns Privacy Terms Of Service Power Estimator Solar System Calculator Lithium Battery Travel Safety
Skip to content
Kent Freestanding Flue Kit With Reflector – Complete 3.6m Wood Fire Flue System (KWF298-7404)

Kent Freestanding Flue Kit With Reflector – Complete 3.6m Wood Fire Flue System (KWF298-7404)

by Kent
$869.00

Notify me when back in stock

✔ NZ Stocked

🛡 Official Warranty

📞 Need help? 0800 464 664

Description

Kent Flue Systems

Kent Freestanding Flue Kit With Reflector (KWF298-7404)

Kent’s most popular freestanding flue kit, designed for Kent wood fires. Includes reflective heat shield brackets and the essential components for a standard vertical installation.

Genuine Kent Product Standard Ceiling Kit Includes Reflector Brackets NZ Compliance Focused SKU: KWF298-7404

Complete Flue System

Includes the key flue components for a standard freestanding wood fire installation — designed to match Kent fire specifications.

Reflective Heat Shield Brackets

Reflector brackets help manage heat around the flue system and support compliant clearances when installed to the relevant standard.

Designed for Standard Vertical Installs

Ideal for typical ceiling/roof penetrations. If you have a sloping ceiling or extra height, you may need additional components.

Built for NZ Conditions

Suitable for New Zealand installations when fitted by a qualified installer in line with Kent instructions and applicable standards.

What’s Included

  • Inner stainless flue sections
  • Outer casing sections
  • Ceiling plate
  • Cowl / terminal
  • Reflector brackets
  • Fixings (as supplied by Kent)

Note: Exact contents can vary by revision.

Compatibility

Designed for Kent freestanding wood fires that require this standard vertical flue configuration.

  • Best match for Kent freestanding models using a standard vertical flue run
  • If you’re unsure, message us your fire model + ceiling height and we’ll confirm before you buy
Not sure which kit you need?
Tell us your Kent fire model, ceiling type (flat/sloping), and approximate ceiling height — we’ll help you avoid ordering the wrong kit.

Installation Notes

  • Professional installation recommended/required
  • Install must comply with the NZ Building Code and relevant standards (e.g. AS/NZS 2918)
  • Clearances, roof type, and flashing requirements must be confirmed for your site

We supply the kit — your installer confirms site-specific compliance and clearances.

Shipping & Delivery

  • Ships via freight due to carton length
  • Typical delivery: 3–7 working days depending on location
  • Depot collection may be available in some regions
Rural delivery: freight timeframes can vary — if you’re rural, send us your address and we’ll confirm ETA/options.

FAQs

Is this the replacement for the older KWF298-7005 kit? Yes — Kent’s current listing for the freestanding flue kit with reflector is SKU KWF298-7404. If you previously referenced KWF298-7005, this newer SKU is the one we recommend using going forward.
Will this fit my Kent wood fire? It’s designed for Kent freestanding fires that use this standard flue configuration. If you message us your fire model (e.g. Oxford / Benmore / Cardrona) and ceiling type (flat or sloping), we’ll confirm compatibility before dispatch.
Is this suitable for a sloping ceiling? This kit is aimed at a standard vertical installation. Sloping ceilings often need a dedicated sloping-ceiling kit or additional parts. If your ceiling is sloped, tell us the pitch (approx.) and ceiling height and we’ll point you to the right setup.
Do I need extra flue length? Maybe. Roof height, ceiling height, and termination requirements vary by install. If your installer indicates you need additional height, you can add compatible extension lengths. Send us your measurements and we’ll advise.
Can I install this myself? For safety and compliance, we recommend using a qualified installer. Your installer will confirm clearances and ensure the install meets the applicable standard and Kent’s instructions.
Why is freight used instead of standard courier? Flue kits are long cartons and are typically moved via freight networks. This reduces damage risk and improves delivery reliability.
Why Buy From Us

We get it. You've got a lot of choice when it comes to online retailers.
Here's why we think you should shop with us at The Off Grid Store.

We can deliver to almost anywhere in New Zealand, unfortunately there are a few exceptions such as Chatham Islands and for larger items and Great Barrier Island. Best prices online guaranteed.

30 Day Easy Returns. Not happy with your product, we'll take it back no
questions asked.
Great Service. We pride ourselves on the best service, anywhere.
Your Satisfaction Guaranteed. We handpick our products for quality, we
know you'll love them. But if there is ever something wrong, we'll fix it.

Accessories
  • Standard Flue Kit Inc. Reflector for Freestanding Fires
  • Energy Saver Flue Kit Inc. Reflector for Freestanding Fires
  • Wall Floor Protector – Small
  • Corner Floor Protector – Small
Shipping

Kent Shipping Rates

Shipping Option Cost
Auckland/Waikato Standard $50.00
North Island — Nearest Shipping Depot Only $70.00
South Island — Nearest Shipping Depot Only $125.00
Direct Delivery From $50–$195 depending on location
Remote Delivery Note:
Some remote or hard-to-access locations may require custom freight arrangements or depot collection. If this applies to your order, we’ll contact you before dispatch to confirm the best available option.
Description

Kent Flue Systems

Kent Freestanding Flue Kit With Reflector (KWF298-7404)

Kent’s most popular freestanding flue kit, designed for Kent wood fires. Includes reflective heat shield brackets and the essential components for a standard vertical installation.

Genuine Kent Product Standard Ceiling Kit Includes Reflector Brackets NZ Compliance Focused SKU: KWF298-7404

Complete Flue System

Includes the key flue components for a standard freestanding wood fire installation — designed to match Kent fire specifications.

Reflective Heat Shield Brackets

Reflector brackets help manage heat around the flue system and support compliant clearances when installed to the relevant standard.

Designed for Standard Vertical Installs

Ideal for typical ceiling/roof penetrations. If you have a sloping ceiling or extra height, you may need additional components.

Built for NZ Conditions

Suitable for New Zealand installations when fitted by a qualified installer in line with Kent instructions and applicable standards.

What’s Included

  • Inner stainless flue sections
  • Outer casing sections
  • Ceiling plate
  • Cowl / terminal
  • Reflector brackets
  • Fixings (as supplied by Kent)

Note: Exact contents can vary by revision.

Compatibility

Designed for Kent freestanding wood fires that require this standard vertical flue configuration.

  • Best match for Kent freestanding models using a standard vertical flue run
  • If you’re unsure, message us your fire model + ceiling height and we’ll confirm before you buy
Not sure which kit you need?
Tell us your Kent fire model, ceiling type (flat/sloping), and approximate ceiling height — we’ll help you avoid ordering the wrong kit.

Installation Notes

  • Professional installation recommended/required
  • Install must comply with the NZ Building Code and relevant standards (e.g. AS/NZS 2918)
  • Clearances, roof type, and flashing requirements must be confirmed for your site

We supply the kit — your installer confirms site-specific compliance and clearances.

Shipping & Delivery

  • Ships via freight due to carton length
  • Typical delivery: 3–7 working days depending on location
  • Depot collection may be available in some regions
Rural delivery: freight timeframes can vary — if you’re rural, send us your address and we’ll confirm ETA/options.

FAQs

Is this the replacement for the older KWF298-7005 kit? Yes — Kent’s current listing for the freestanding flue kit with reflector is SKU KWF298-7404. If you previously referenced KWF298-7005, this newer SKU is the one we recommend using going forward.
Will this fit my Kent wood fire? It’s designed for Kent freestanding fires that use this standard flue configuration. If you message us your fire model (e.g. Oxford / Benmore / Cardrona) and ceiling type (flat or sloping), we’ll confirm compatibility before dispatch.
Is this suitable for a sloping ceiling? This kit is aimed at a standard vertical installation. Sloping ceilings often need a dedicated sloping-ceiling kit or additional parts. If your ceiling is sloped, tell us the pitch (approx.) and ceiling height and we’ll point you to the right setup.
Do I need extra flue length? Maybe. Roof height, ceiling height, and termination requirements vary by install. If your installer indicates you need additional height, you can add compatible extension lengths. Send us your measurements and we’ll advise.
Can I install this myself? For safety and compliance, we recommend using a qualified installer. Your installer will confirm clearances and ensure the install meets the applicable standard and Kent’s instructions.
Why is freight used instead of standard courier? Flue kits are long cartons and are typically moved via freight networks. This reduces damage risk and improves delivery reliability.
Why Buy From Us

We get it. You've got a lot of choice when it comes to online retailers.
Here's why we think you should shop with us at The Off Grid Store.

We can deliver to almost anywhere in New Zealand, unfortunately there are a few exceptions such as Chatham Islands and for larger items and Great Barrier Island. Best prices online guaranteed.

30 Day Easy Returns. Not happy with your product, we'll take it back no
questions asked.
Great Service. We pride ourselves on the best service, anywhere.
Your Satisfaction Guaranteed. We handpick our products for quality, we
know you'll love them. But if there is ever something wrong, we'll fix it.

Accessories
  • Standard Flue Kit Inc. Reflector for Freestanding Fires
  • Energy Saver Flue Kit Inc. Reflector for Freestanding Fires
  • Wall Floor Protector – Small
  • Corner Floor Protector – Small
Shipping

Kent Shipping Rates

Shipping Option Cost
Auckland/Waikato Standard $50.00
North Island — Nearest Shipping Depot Only $70.00
South Island — Nearest Shipping Depot Only $125.00
Direct Delivery From $50–$195 depending on location
Remote Delivery Note:
Some remote or hard-to-access locations may require custom freight arrangements or depot collection. If this applies to your order, we’ll contact you before dispatch to confirm the best available option.