Recharge a compatible portable power station from a suitable vehicle electrical system, with up to 500W charging output.
EcoFlow 500W Alternator Charger
Add another charging option for touring, camping and mobile work.
The EcoFlow 500W Alternator Charger transfers energy
from a suitable vehicle electrical system to a compatible portable
power station while you travel.
The supplied XT60i output cable connects to a suitable
power-station charging input. Compatibility and charging speed depend
on the receiving unit’s electrical limits—not simply whether the connector fits.
Up to 500W Charging
XT60i Cable Included
12V / 24V Vehicle Input
App Configuration
Vehicle Installation Required
Recharge Between Stops
Use driving time to replenish stored energy for your destination. Available charging power varies with the vehicle and connected equipment.
Another Charging Source
Reduce dependence on finding a mains outlet or waiting for suitable solar conditions.
Included Output Cable
The supplied XT60i cable provides a charging connection for compatible power stations, subject to their input limits.
Portable Battery Storage
The charger stays installed in the vehicle while your separately purchased power station can be disconnected for use elsewhere.
🔧 What’s Included
- 1 × EcoFlow 500W Alternator Charger
- XT60i output cable
- Standard vehicle input wiring and installation accessories supplied with the charger
- User documentation
Power station, professional installation and optional XT150
output cable are not included. Additional vehicle-specific
installation materials may be required.
Charging only with the included cable:
Reverse charging and battery maintenance are not available through the
supplied XT60i connection. These functions require an optional XT150
cable and a supported EcoFlow system, with any necessary adapters.
Do not treat the standard package as a direct engine jump starter.
🔌 Power-Station Compatibility
Before purchasing, check the power station’s permitted input voltage,
current and wattage, together with the charger’s supported output settings.
An XT60-style connector alone does not establish compatibility.
Some power stations accept less than 500W through their solar or DC
input. The charger cannot override those limits.
For supported third-party power stations, confirm the complete connection
arrangement before use. Reverse charging and battery maintenance are
not supported with third-party units.
Check settings before connecting:
Select the correct output configuration for your exact power-station
model. Do not exceed its maximum input voltage or assume settings
suitable for one EcoFlow model are suitable for another.
🚗 Vehicle Suitability & Installation
This charger requires connection to a suitable vehicle electrical system.
It does not plug into a cigarette-lighter socket.
Check available alternator capacity alongside the vehicle’s normal loads.
Suitable mounting, protected cable routing, correctly positioned electrical
protection and secure connections are essential.
Follow EcoFlow’s instructions and use a suitable auto electrician or
qualified installer where needed. Confirm suitability separately for
hybrid, electric or other non-standard vehicle electrical systems.
Keep the charger accessible for the controls and operating steps required
by the supplied cable arrangement. Check the installation instructions
before concealing it behind trim or cabinetry.
Installation is arranged separately and is not included in the product price.
⚡ Charging Expectations
The charger provides up to 500W under suitable conditions.
Actual power depends on the vehicle, installation, selected output mode,
power-station input limits, temperature and battery state.
At a constant 500W, one hour represents up to 500Wh of charging energy
before losses. This is an upper-rate calculation—not a guaranteed
battery gain from every hour of driving.
Compare your daily consumption with realistic driving time. Short trips
may provide a useful top-up without replacing all the energy used.
Vehicle charging is not free energy:
It adds load to the vehicle’s electrical system and can increase fuel
consumption. Never run a vehicle inside a garage or another enclosed
space to recharge a power station.
☀️ Using the Solar Input
Where the charger connects through a power station’s solar input, it
occupies that connection. Do not connect solar panels and the alternator
charger together using an improvised splitter.
If the power station has another independent solar input, ask us to check
whether a separate solar connection is supported. Do not assume all
charging sources can operate simultaneously.
📊 Key Specifications
| Product |
EcoFlow 500W Alternator Charger |
| Maximum charging output |
500W, subject to output mode and receiving equipment |
| Vehicle input |
12V / 24V systems; specified input range 11–31V DC |
| Specified charging outputs |
40–60V DC, up to 500W; or 24V DC, up to 360W |
| Included power-station cable |
XT60i output cable |
| Reverse charging with included cable |
Not supported |
| Battery maintenance with included cable |
Not supported |
| Installation |
Connection to a suitable vehicle electrical system required |
Frequently Asked Questions
Will it charge every power station at 500W?
No. Charging is limited by the receiving power station, the selected output mode, vehicle capability and operating conditions.
Does it plug into a cigarette-lighter socket?
No. It requires installation into a suitable vehicle electrical system using the specified wiring and protection.
Is the output cable included?
Yes. The standard package includes an XT60i output cable. Check compatibility with your exact power-station model before ordering.
Can it maintain or recharge my vehicle battery?
Not through the included XT60i cable. Those functions require an optional XT150 connection and a supported EcoFlow system. Ask us to confirm the required equipment first.
Can I use it with another brand of power station?
Some third-party models may be supported, but the connector, voltage, current and input limits must all be checked. Reverse charging and maintenance functions are not supported with third-party units.
Can solar panels stay connected too?
Not to the same input using an improvised splitter. Any simultaneous charging arrangement must be supported by the power station and correctly connected.
Is professional installation included?
No. Installation is arranged separately. We recommend a suitable auto electrician or qualified installer where needed.
Need help checking compatibility?
Contact us with your vehicle details
and the exact make and model of your power station.