Rinnai EF26 Condensing CF External LPG
Product Details
Suitable for
– external residential applications only
– mains and medium pressure systems
Hard or acidic water will need to be treated to use this product.
Not suitable
– as a spa or swimming pool heater
– for hydronic applications
– as a gas boost for solar connections1
1 Temperature cannot be set high enough, use our HD models instead.
Available for Natural Gas or LPG, specify at the time of purchase
White
50 °C
EF26 → E2626W-ZK
26 L/min (1560 L/h) at a 25 °C rise
Forced flue
Fitted as standard. Frost protection operates automatically, as long as the appliance is connected to the electrical power supply, by activating when the temperature inside the unit drops below 3.5 °C, and turns off once the temperature inside the unit reaches 7 °C.
Direct electronic ignition
NG – 1.13kPa, LPG – 2.75 kPa
3.5 kPa (maximum standing pressure under abnormal intermittent conditions is 5.0 kPa).
In the case of commercial metering, (i.e. 35-37 kPa coming in), there may be a requirement to regulate the incoming pressure down.
Normal 63 W, standby 2 W, and automatic frost protection 92 W
Valve opens at 2060 kPa
Valve closes at 1479 kPa
50 dB(A) approx. Some people are susceptible to low level noise. This needs to be considered if locating an appliance near a bedroom.
- Flame failure
- Boil-dry protection
- Overheat protection
- Fusible link
- Pressure relief valve
- Combustion fan RPM check
Nominal operating pressure: 220-1000 kPa
Minimum operating water flow will depend on setpoint and inlet temp.
18 kg
Energy Safety Supplier Declaration of Compliance: Declaration number – 1923220199
